Charging Manual

Alpitronic Hypercharger 150/300

1. START CHARGING PROCESS

  • Hold your RFID card up to the card reader and wait for another connection check.
  • As this charging station has different connections, select the outlet that you require on the display (CCS, CHAdeMO).
  • Insert the plug into the charging socket on the vehicle until it clicks. 
  • Touch the display to start the charging process.
  • The charging process will start and the battery charge level, remaining charging time, supplied kWh and expired charging time will be shown on the display.
  • After some time the display will be locked automatically. You can unlock it by holding your RFID card to the card reader.

2. END THE CHARGING PROCESS

  • Hold your RFID card to the card reader to finish the loading process.
  • Press the STOP button on the display.
  • Disconnect the charging cable from the vehicle. CHAdeMO: press the button on the chargoing cable  for disconnecting the vehicle.

Important note

  • The security check between the vehicle and wallbox can take up to 30 seconds.
  • If the charging process is started via your mobile phone, it must also be terminated via your mobile phone. A combination of different activation methods (customer card, mobile phone) is not possible.
  • INCIDENTS: In case of incidents please contact the service hotline +420 267 055 267.